Focus Konstruksjon 2D is a FEM analytical program for Microsoft Windows that calculates any construction be it simple or complex by element methodology.
This program has a simple and easy to learn built in workflow that makes it easy to use out of the box. You can build anything from, a simple joist to more complexed builds, all in 2D. Use any material, steel, wood, or concrete, and run a full global analysis of the construction using the Eurocodes with national annexes for United Kingdom, or Norway, or Sweden.
Focus Konstruksjon 2D consists of a basic module that you can supplement with four different additional modules according to your needs; Steel, Wood, Concrete and Dynamics.
The ability to model shells is only available in Konstruksjon 3D.
A structure can be modelled with straight beam or bar segments, curved beam segments and shells. The bar segments can take either tension, compression or both. All segments can have linearly variable cross-sections and can be retrieved from the extensive profile database in the program. In addition, you can define your own cross-sections as needed. Shells, such as slabs and plates, are available in Focus Konstruksjon 3D and can be modelled with concrete, steel and wood (CLT or Kerto) as material.
Focus Konstruksjon 3D handles most layouts, even if these are rotated, and different types of joints and springs. Line edge conditions and surface edge conditions may also contain springs. This makes it easy to model stiffness against the ground and the like. The program also handles eccentricities.
Focus Konstruksjon has a library of wizards to set out e.g. walls, columns, beam system, trusses, frames and floor frames.
Loads combinations are built up quickly and easily by load cases. These can contain distributed loads such as line loads and surface loads, concentrated loads, prescribed displacements, moments, temperature loads and initial strains.
If you want to calculate snow loads or wind loads, these can be set out using wizards that generate the loads according to EN 1991-1-3 and EN 1991-1-4, respectively. The program also has a very useful wizard for generating load combinations according to EN 1990.
There are several analysis types available in Focus Konstruksjon 2D such as static analyses based on both linear and non-linear theory, buckling analysis, influence line analysis and load train analysis.
The results are displayed graphically for moments, forces, displacements and buckling modes. You can easily get exact values for moment, force and displacement.
The program makes it easy to document your calculations and you can create custom reports using print templates. It also comes with ready-made templates that make it easy to create the reports you need. You can either define your own or modify one of the existing templates. This way, you are guaranteed to document exactly what you want.
The main program Focus Konstruksjon 3D can be expanded with several specialized tools and functions. We offer solutions developed for the Norwegian market, with Norwegian standards and library content that simplifies your workflow considerably.
<h4″>Dynamikk 2D
In the Dynamics module, you can perform earthquake analyses in accordance with Eurocode 8, and in addition you can find the vibration modes of the structure and at what frequencies these occur. The dynamics module contains two different dynamic analyses; a vibration analysis and a response spectrum analysis.
Prices from
4 550,-
Annual subscription (NOK)
In the concrete module you can make concrete structures, install reinforcement and perform design check according to the current concrete standard, Eurocode 2.
Prices from
4 550,-
Annual subscription (NOK)
”Learn
In the steel module you get access to design check for steel in accordance with Eurocode 3. The program also supports design check according to previously issued standard NS 3472.
Prices from
4 550,-
Annual subscription (NOK)
”Learn
In the wooden module you can make wooden structures and perform design check according to Eurocode 5. The check is performed according to EN 1995 based on the calculated static results. The program also supports design check according to previously issued standard NS 3470.
Prices from
4 550,-
Annual subscription (NOK)
”Learn
A simple and easy to-use-interface.
Create your 3D model, add loads and forces, view illustrated previews of all results.
Easy to do global analysis with all material types together. Analyse steel, wood and concrete materials in one complete model.
Load-guides for snow, wind and other load combinations. Snow and wind loads are calculated according to: EN 1991-1-3 and EN 1991-1-4.
